○ 4K resolution ○ Wifi & GPS ○ Vantrue Cloud option ○ 512gb support Read more
€199,99
Free extra buyer protection.
○ 4K resolution ○ Wifi & GPS ○ Vantrue Cloud option ○ 512gb support
The Vantrue E1 Pro is Vantrue's smallest Cloud dashcam. Connect it to the optional LTE module to connect to your camera anywhere in the world. It films in ultra-sharp 4K resolution thanks to the Sony Starvis IMX678 image sensor, and with PlatePix technology, number plates are always recognisable on screen.
This Vantrue E1 Pro records in ultra-sharp 2K QuadHD 2592*1944p at 25fps. You can also set the resolution lower to 2560*1440p. Thanks to HDR (High Dynamic Range), the contrast of the recordings is very good and the surroundings are also recognisable in the dark.
Perhaps the best feature of this Vantrue E1 Pro is the ability to connect to the dashcam from anywhere in the world. The Vantrue LTE module (see accessories) supports SIM cards with an active internet connection. Connect the Vantrue LTE module to the dashcam and you have full Cloud connection anywhere in the world.
Vantrue Cloud offers you 2GB of free cloud storage for all parking mode videos. When the cloud storage is full, the oldest images are automatically overwritten by new ones. In the event of special occurrences (severe vibrations), a notification is also sent to your phone and the video is securely stored in the cloud so that it cannot be automatically deleted.
The Vantrue E1 Pro is equipped with a small 1.5-inch LCD screen on which you can view the recordings and easily operate the menu. The screen has a screensaver that activates after 1 minute so that it does not distract you while driving. You can also turn the screen on and off with the voice commands “Turn on screen” and “Turn off screen”.
You can easily view the recorded videos on your smartphone within range of the dashcam (+/- 5 metres) via the Vantrue App for iOS or Android. The videos can be viewed live and you can download saved videos to your phone so you can share them immediately. The fast 5 GHz connection makes downloading the images very quick.
The Vantrue E1 Pro is equipped with GPS so that the current speed and coordinates are tracked. If desired, the speed can be displayed at the bottom of each video, and the filming location and route can be viewed later via the app.
The Vantrue E1 Pro allows you to control the dashcam via voice commands (in English). Commands such as “Make picture”, “Turn off screen”, “Turn on audio” and “Lock the video” allow you to use the dashcam safely while driving and ensure you don't miss a single incident.
Vantrue offers the option to secure your car while parked. Connect your Vantrue dashcam to the OBD or 3-wire hardwire kit to provide power to the dashcam even when the car is turned off. The power supply sends a signal to the dashcam as soon as you turn off the car, automatically activating parking mode.
Parking mode only works in combination with the OBD or 3-wire hardwire kit. This hardwire kit has a safety feature that cuts off the power at a certain voltage so that you don't end up with a flat battery.
Vantrue has four recording modes during parking:
Motion detection: Motion detection (with adjustable sensitivity) where the dashcam is on standby until visual movement is detected. After this, 5 seconds before and 30 seconds after the incident are recorded.
Collision detection: Vibration detection (with adjustable sensitivity) where the dashcam switches off until a vibration is detected. After this, the dashcam switches on, records for 1 minute and then switches off again.
Low bitrate recording: Continuous recording in lower quality (720p or 1080p at 15fps) to save space on the SD card. As soon as a vibration is detected, a normal 1-minute recording is started.
Time lapse recording: Continuous recording at 1fps, 5fps, 10fps or 15fps to save space on the SD card. At 1fps, a period of 30 minutes is played back in 1 minute. As soon as a vibration is detected, a normal 1-minute recording is started.
The Vantrue E1 Pro has a wide viewing angle of 158 degrees, capturing a very large area around the car.
The Vantrue E1 Pro is attached to the windscreen with a handy self-adhesive GPS holder with a magnetic connection. The dashcam can be clicked in and out of this holder in one movement. An additional GPS holder is available if you want to use your Vantrue E1 Pro in multiple cars (see accessories).
Attach the optional CPL (Polaroid) filter to your Vantrue dashcam to prevent annoying reflections from the dashboard or interior. The filter can be attached to the dashcam in no time and is easy to adjust by turning it.
The Vantrue E1 Pro can be expanded with a handy Bluetooth SOS button. This button can be placed anywhere in the car and with one press of the button you can take a photo and secure video or turn the dashcam's microphone on and off.
The Vantrue E1 Pro has a built-in G-sensor. This sensor registers vibrations in the event of a collision. In that case, the current video is stored securely.
The Vantrue E1 Pro is equipped with loop recording, which automatically overwrites the oldest images with new ones. The videos are stored in shorter 5-minute segments, and once the SD card is full, the oldest segment is deleted.
Secure recordings (manually selected or detected by the G-sensor) are stored in a separate folder and are not deleted by the loop recording. This way, you always have access to the latest and most important videos.
Vantrue is one of the few dashcam brands that supports SD cards up to 512GB. With 512GB, you can store up to 108 hours (more than 4 days) of Full HD videos. At a higher resolution, the total recording time will be slightly shorter.
| Image | |
|---|---|
 ChannelsThe number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
1CH
|
 ResolutionVideo resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
Full HD, 2K, and 4K
|
 Night visionThe quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
 Viewing angleDashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
 Image sensorThe image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
 ProcessorThe chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
 WifiWifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
 GPSA dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
 Parking modeA dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
 Parking mode typesIn parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Vibration detection, Motion Detection, and Time lapse
|
 CloudA dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
 Loop recordingLoop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
 G-sensorThe G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
 ADASAdvanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
 LCD displayAn LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
 LCD size |
|
 TouchscreenA dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
 Mount typeA dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Adhesive
|
 Plug typeThe type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
 CPL filter optionA CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
 Memory typeThe way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
 SD supportWith a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
 MicrophoneA microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
 BatteryA dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
 PowerThe voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
 Weight |
571 g
|
 Dimensions |
|
| General | |
 Brand |
Vantrue
|
 Price |
€199,99 |
 Warranty |
|
 EAN barcode |
0193368006606
|
| Contents | |
 In the box |
|
 | |
|---|---|
| Image | |
| Channels The number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
1CH
|
| Resolution Video resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
Full HD, 2K, and 4K
|
| Night vision The quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
| Viewing angle Dashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
| Image sensor The image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
| Processor The chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
| Wifi Wifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
| GPS A dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
| Parking mode A dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
| Parking mode types In parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Vibration detection, Motion Detection, and Time lapse
|
| Cloud A dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
| Loop recording Loop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
| G-sensor The G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
| ADAS Advanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
| LCD display An LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
| LCD size |
|
| Touchscreen A dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
| Mount type A dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Adhesive
|
| Plug type The type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
| CPL filter option A CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
| Memory type The way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
| SD support With a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
| Microphone A microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
| Battery A dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
| Power The voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
| Weight |
571 g
|
| Dimensions |
|
| General | |
| Brand |
Vantrue
|
| Price |
€199,99 |
| Contents | |
| In the box |
|
