Innovv N1 Pro 2CH Wifi CarPlay monitor and dashcam for motorbikes

This Innovv N1 Pro is a highly advanced dashcam and CarPlay monitor for motorbikes in one. The two Full HD cameras record everything in front of and behind you, and you can connect your phone via Bluetooth to the monitor on the handlebars to use Google Maps or other CarPlay apps, for example. In addition, this Innovv is equipped with all the familiar Innovv features, such as Wifi.

CarPlay monitor and dashcam in one

What makes this Innovv N1 Pro special is the ability to connect your phone to the dashcam via Bluetooth. You mount the touchscreen monitor on the handlebars and connect your phone via Bluetooth to use Apple or Android CarPlay. The monitor is 5.99 inches with high brightness and a pleasant widescreen aspect ratio of 18:09.

2x Full HD recordings

The Innovv N1 Pro films at the front and rear using high-quality Sony Starvis IMX307 sensors. These ensure extremely sharp Full HD 30fps videos that remain surprisingly clear even in the dark.

Loop recording

The Innovv N1 Pro works just like a car camera: the videos are stored on a Micro SD card (not included). When the SD card is full, the oldest footage is automatically overwritten to free up space for new recordings. The camera therefore continues to record at all times, so you don’t have to worry about it.

IP67 waterproof

The cameras and monitor are IP67 waterproof, meaning they can withstand the most extreme weather conditions. So you can keep recording even in the rain. The connection to the battery pack or USB port is not waterproof and should therefore be stored away or shielded.

Optional Innovv Lens Protector

The Innovv Lens Protector is designed to protect the original lens of your Innovv camera from everyday elements such as stone chips, sand, dirt and light scratches. This ensures optimal image quality and extends the camera’s lifespan.

5.0GHz Wifi

The Innovv N1 Pro is equipped with 2.4 and 5.0GHz Wifi for the fastest connection to your phone. Viewing and downloading videos is therefore a breeze. You can, of course, also remove the SD card from the camera and insert it into your PC to view the footage.

Hardwire connection

You connect the Innovv N1 Pro to the motorbike’s battery using the supplied 3-wire converter. The red wire must be connected to a constant positive (which remains on at all times) and the yellow wire to a switched positive (which turns on and off with the ignition). The yellow cable allows the dashcam to detect when you start the motorbike, so that the dashcam switches on and off automatically and the last video can still be saved when the ignition is switched off.

G-sensor

Thanks to the built-in G-sensor, the dashcam detects when you have been involved in a collision. In the event of an impact, footage is automatically saved securely so that it is not lost. It cannot be overwritten by the automatic loop recording.

120˚ + 120˚ viewing angle

The cameras on the Innovv N1 Pro have a wide viewing angle of 120˚, allowing a large area around you to be recorded.

256GB support

The camera supports Micro SD cards up to 256GB, which is enough for around 30 hours of Full HD recording. SD cards of 64GB, 128GB or 256GB must be formatted in the camera before use. This can be done easily via the app.